HW15710C
The Datong HW15710C Heavy Manual No-Sync Gearbox has a maximum input torque of 1500 N.m, a maximum input speed of 2600 RPM, a torque of 1650 N.m, a gear ratio range of 10.73 – 0.75, an oil capacity of 12 L (12.5 L when equipped with a power take-off), an overall length of 843 mm, and a weight of 363 kg. The weight of the same series aluminum housing transmission is 263 Kg. (The weight does not include the lubricating oil and clutch disengagement device; the length refers to the distance from the front face of the clutch stop to the output flange end; the oil capacity in parentheses is for when a power take-off is installed.)
In the detailed model name, “HW” represents the brand. The number “15” indicates 1% of the torque, with a 1/10 notation used when the torque is less than three digits. The number “7” signifies the series number, denoting a heavy-duty transmission series. “10” represents the number of forward gears, “A” stands for AMT (Automated Manual Transmission), “C” denotes an overdrive gear, and “T” signifies the presence of a synchronizer.
As part of EMAC, DuraMac provides a complete power system integrating DCEC engine, Fast-Eaton clutch, DaTong-Gear gearbox, Dongfeng-DANA axle and Komman air suspension. With the future trend of automotive electrification, Duramac is also actively developing in the field of electric vehicle power systems.
The company provides customers with full life cycle services, from design to power system supply, installation and commissioning, to after-sales service training and spare parts supply, as well as troubleshooting and overhaul technical support. This full range of services ensures that customer equipment maintains high reliability and long-term operating efficiency during use.
Advantages of HW15710C Heavy Duty Manual Non-Synchronized Transmission
-
Main box double intermediate shaft mechanism, auxiliary box planetary mechanism, 5X2 combination.
-
Long-distance single H control, optional single lever/double lever control, and gear shift booster can be installed.
-
Combination of forced lubrication and gear splash lubrication.
-
Many gears, small step difference, easy shifting, and strong fuel saving.
-
Rich options, can be installed with rear power take-off, hydraulic retarder, etc., suitable for a wide range of models.
-
Can use long-term oil, first and fixed warranty of 100,000 kilometers.
Technical Specifications
| Gearbox Model: | HW15710C |
| Oil Capacity(PTO): | 12 L (12.5 L) |
| Maximum Input Speed: | 2600 RPM |
| Maximum Input Torque: | 1500 N.m |
| Torque: | 1650 N.m |
| Total Length: | 843 mm |
| Gear Ratio Range: | 10.73 – 0.75 |
| Dry Weight: | 363 kg |
| Lead Time: | 15 – 30 Working Days |
| Payment Terms: | T/T ,L/C |
HW15710C Gearbox Main Performance Parameters
| Product Model | All Gear Positions Speed Ratio Table | ||||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | R1 | R2 | ||
| HW15710C | 10.73 | 7.98 | 5.91 | 4.38 | 3.29 | 2.45 | 1.82 | 1.35 | 1 | 0.75 | 10.49 | 2.39 | |
| Maximum Input Torque | 1500 N.m | Maximum Input Speed | 2600 RPM | ||||||||||
| Dry Weight | 363 kg | Oil Capacity(PTO) | 12 L (12.5 L) | ||||||||||
| Gear Ratio Range | 10.73 – 0.75 | Torque | 1650 N.m | ||||||||||
| Total Length | 843 mm | Aluminum Case Gearbox of the Same Series | 263 kg | ||||||||||
|
Note:
|
|||||||||||||
Our products are designed and manufactured in strict accordance with industry standards, ensuring the precision of every part’s dimensions to meet the high standards of compatibility, performance, and safety required by our customers. The accuracy of dimensions is crucial for the correct installation and optimal operation of the products; any deviation may lead to installation issues, performance degradation, or even safety hazards. Therefore, we strongly recommend that customers carefully refer to the technical drawings and specifications we provide when purchasing, and select the most suitable product model based on their specific needs and procurement standards. We are committed to delivering high-quality products and exceptional customer service to ensure customer satisfaction and the smooth progress of projects.
The following is the numbering rules of Datong HW15710C transmission. The main box of the transmission adopts a double countershaft structure, and the auxiliary box adopts a planetary reduction structure, which makes the load-bearing capacity stronger and the structure more reliable. The integrated small cover design makes the gear position clear and the gear shifting flexible.
Use, Maintenance, and Precautions for HW15710C Transmission
Requirements for use
Operating the transmission properly and reasonably, and conducting regular maintenance are crucial for ensuring the safe and reliable operation of the vehicle and for extending the lifespan of the transmission. Please follow the usage requirements outlined below：
1. Lubricant Specification
The transmission should be filled with 85W/90 GL-5 grade vehicle gear oil.
2. Correct oil level
Make sure the oil level is flush with the oil level observation port. Check the oil level through the oil level observation port on the side of the housing. Fill the oil until it overflows from the orifice. The oil filling volume is about 12L (12.5L when a power take-off is installed).
3. Oil Level Check
The oil level height should be regularly inspected, and the vehicle should be parked on a level surface for the oil level check. To prevent inaccurate measurements due to the expansion of hot oil, the vehicle should not be checked immediately after driving. The inspection should only be conducted when the oil level is stable and the oil temperature is close to ambient temperature.
4. Replenish the lubricant
In order to prevent chemical reactions between different types of lubricants, the lubricant should be of the same type as the original lubricant when replenishing it.
5. Oil Change Period
When changing the lubricating oil in the transmission, first drain the original lubricating oil in the transmission and clean the filter assembly.
The new transmission must have its lubricating oil replaced when it has been driven between 2,000 to 5,000 kilometers.
The oil level and leakage of the lubricating oil should be checked every 10,000 kilometers, replenished at any time, and the filter screen should be cleaned.
The lubricating oil should be replaced every 50,000 kilometers.
6. Operating Temperature
The maximum temperature of the transmission during continuous operation must not exceed 120°C and the minimum temperature must not be lower than -40°C. If the operating temperature exceeds 120°C, the lubricating oil will decompose and shorten the service life of the transmission.
Any of the following conditions can cause the transmission’s operating temperature to exceed 120°C.
- Operating continuously at a driving speed of less than 32 km/h.
- High engine speed.
- High ambient temperature.
- Vortex Surrounding transmission.
- The exhaust system is too close to the transmission.
- High-power overspeed operation.
7. Working Tilt Angle
When the operating inclination angle of the transmission exceeds 15°, lubrication may be insufficient (the operating inclination angle is equal to the mounting angle of the transmission on the chassis plus the ramp angle).
8. Drag or slide
When the transmission is working, the countershaft’s rotation drives the oil pump, and with the addition of splash lubrication, it provides sufficient lubrication for the transmission. But when a vehicle is towed with its rear wheels on the ground and the transmission is connected to the drivetrain, the countershaft gears and the mainshaft gears in the main box do not turn, but there is relative rotation between the mainshaft and its gears, and the planetary mechanism also turns. This can cause serious damage to the planetary mechanism and the mainshaft positioning elements of the transmission due to a lack of lubrication.
To prevent such occurrences, the following points should be noted:
Do not depress the clutch pedal to coast the vehicle in neutral.
When the vehicle needs to be towed, the half shaft can be pulled out or the transmission shaft can be disengaged, or the driving wheels can be lifted off the ground for towing.
9. Push Clutch Bearing Lubrication
Add grease during vehicle maintenance, 8-10ml each time; in addition, users can add grease from time to time according to the use of the clutch.
Matters needing attention
1. When shifting gears, the clutch must be fully disengaged, and the gear lever should be properly positioned in gear.
2. The shift handle switch valve has two positions: high gear and low gear. When parking, the switch valve should be placed in the neutral position in the low gear area.
3. When the vehicle is in low gear or reverse gear, it should be stopped first and then put into gear to avoid damaging the internal parts of the transmission.
4. When shifting the transmission from the low gear range to the high gear range (and vice versa), the switch valve should first be set to the H position, then clutch and shift to neutral. After a conscious pause in the neutral position, depress the clutch pedal again and shift to the 6th gear (which is in the 1st gear position). Avoid skipping gears, otherwise, it will impact the service life of the auxiliary gearbox synchronizer.
5. When the vehicle is going downhill, it is forbidden to change the high and low gear zones.
6. Depending on the road conditions, start in 1st or 2nd gear.
7. Before the vehicle starts, the brakes should be released first. For vehicles equipped with air brake systems, after the brake valve is activated, you must wait until the air pressure reaches the level necessary to disengage the brakes before you can shift gears and begin to move.
8. If unusual noises are heard from the transmission while in use, or if the operation feels significantly heavier or other abnormal phenomena are observed, one should immediately stop the vehicle and check it. Resume driving only after the issue has been resolved.
9. This transmission features an interlock mechanism between the main and auxiliary gearboxes. If the auxiliary gearbox has not fully engaged a gear, shifting in the main gearbox is locked out. If you are unable to select a gear, it could be that the interlock between the main and auxiliary boxes is in effect. Please wait for a moment before attempting to shift gears again.
If you still cannot engage the gears, at this point, you should inspect the range gear cylinder and its air lines to identify which component is malfunctioning and repair it promptly.
10. The transmission within the “three guarantees” (warranty) period must not be disassembled or assembled without authorization.
Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Gearbox Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
