DaTong-Gear HW95510A AMT Hybrid Gearbox
The DaTong-Gear HW95510ACL AMT Hybrid Gearbox has external dimensions of 762.2 mm * 464.4 mm * 550 mm, a weight of 148 kg, and an oil capacity of 6L. This gearbox is suitable for light to medium-duty vehicles with a power range between 220 and 300 horsepower. It has a maximum input torque of 950 N.m and a highest input speed of 3200 RPM, operating at an air pressure of 6.5 to 8 Bar and a voltage of 24V DC. (The weight does not include the lubricating oil; the length refers to the distance from the clutch’s front flange end face to the output flange end face.)
In the detailed model name, “HW” represents the brand. The number “95” indicates 10% of the torque, with the 1% notation used when the torque exceeds three digits. The number “5” signifies the series number for the light to medium-duty transmission series. “10” denotes the number of forward gears. “A” stands for AMT (Automated Manual Transmission). “C” represents an overdrive gear, and “L” indicates an aluminum casing.
As part of EMAC, DuraMac provides a complete power system that integrates DCEC engines, Fast-Eaton clutches, DaTong-Gear transmissions, Dongfeng-DANA axles and Komman air suspensions. With the future trend of automotive electrification, Duramac is also actively developing in the field of electric vehicle power systems.
The company provides customers with full life cycle services, from design to power system supply, installation and commissioning, to after-sales service training and spare parts supply, as well as troubleshooting and overhaul technical support. This full range of services ensures that customer equipment maintains high reliability and long-term operating efficiency during use.
These comprehensive power systems and service capabilities enable Duramac to occupy an important position in the field of construction machinery and provide advanced solutions for future electrification trends.
DaTong-Gear HW95510A Series Main Feature
- Both the main and auxiliary boxes have a double intermediate shaft structure, a fine and high gear design, and low noise.
- Adopting WABCO software platform and actuators, the software and hardware are highly mature.
- Can match AMT2.0 traditional shift handle, hand-held gear shifting, and worry-free shifting, with a variety of operating methods for users to choose.
General Specifications of HW95510A Series
| Maximum Input Torque: | 950 N.m |
| Maximum Input Speed: | 3200 RPM |
| Dry Weight: | 148 kg |
| Oil Capacity: | 6 L |
| Overall Dimensions(L * W * H): | 762.2 mm * 464.4 mm * 550 mm |
HW95508A
The DaTong-Gear HW95508ACL AMT Hybrid Gearbox has external dimensions of 762.2 mm * 464.4 mm * 550 mm, a weight of 148 kg, and an oil capacity of 6L. This gearbox is suitable for light to medium-duty vehicles with a power range between 220 and 300 horsepower.
DuraMac
DCEC ISL8.9 series automotive engine is four-strokes engine with 102 mm bore and 120 mm stroke, Equipped with Bosch (or BYC or Weifu) pump. engine comes with turbocharger and Air- Air intercooler. The prime power range is from 269 HP to 394 HP.
Fast Gear
The F6A Series Automated Transmission uses the FAST automatic transmission, has six front gears, the transmission ratio step arrangement is reasonable, has very outstanding fuel economy. Adopt hydraulic automatic transmission. The F6A Series Automated Transmission has six gears, each with a different reduction ratio.
EV Truck
Electric wheel dump trucks use electricity as a power source, completely abandoning traditional fuel engines. This change enables the vehicle to achieve true “zero emissions” during operation, without the emission of pollutants such as carbon monoxide, nitrogen oxides, and particulate matter in the exhaust gas, greatly reducing the pollution to the atmospheric environment.
DANA Axle
Applying the advanced technology of DANA with high efficiency, fuel economy, strong load torque, low noise,high reliability, lower procurement cost, low repair cost and lower maintenance cost.
Datong Gear
The Datong HW25712XSJ Heavy Manual No-Sync Gearbox has a torque of 2500 N.m, a gear ratio range of 14.941-1, an oil capacity of 13 L (13.5 L when equipped with a power take-off), an overall length of 993 mm, and a weight of 428 kg.
Crane Trucks
The DFZ5258JSQSZ6D truck crane is a powerful and versatile vehicle designed for efficient lifting and transportation tasks. Equipped with a YCS06300-61 engine and a Shaanxi Auto Fast gear : 10JS120TA high-low gear with synchronizer、PTO gearbox, it provides strong and stable power for demanding operations.
| DaTong-Gear HW95510A AMT Hybrid Gearbox Catalogue |
Gearbox Model |
Gear Ratio Range |
Working Air Pressure |
Gearbox Model |
Gear Ratio Range |
Working Air Pressure |
||
| HW95510ACL | 9.06 – 0.78 | 6.5 ～ 8 Bar | |||||
| ——END—— | |||||||
DaTong-Gear HW95510A Series AMT Hybrid Gearbox
HW95510ACL
Oil Capacity: 6 L
Maximum Input Speed: 3200 RPM
Maximum Input Torque: 950 N.m
Working Air Pressure: 6.5 ～ 8 Bar
Working Voltage: 24V DC
Dry Weight: 148 kg
