SHENGRUI-New Energy Platform FF8HT Series Transmission
The New Energy Platform FF8HT (Front-engine Front-wheel drive 8-speed Hybrid Automatic Transmission) series adopts the mature transverse FF8AT platform with a rated maximum input torque of 420 N.m. This P2 hybrid automatic transmission matches front-wheel drive hybrid passenger vehicle powertrains, featuring high platform commonality and outstanding energy-saving performance. The maximum input torque of this hybrid variant reaches 420 N.m.
In the detailed model name, “FF” represents Front-engine Front-wheel drive layout, “8” means 8 forward gears, “H” stands for Hybrid configuration, and “T” signifies synchronizer structure. This hybrid transmission is derived from the horizontal FF8AT fuel transmission platform, which can be upgraded to hybrid power architecture on the basis of FF8AT structure.
As part of EMAC, DuraMac provides a complete power system that integrates DCEC engines, Fast-Eaton clutches, DaTong-Gear transmissions, Dongfeng-DANA axles and Komman air suspensions. With the future trend of automotive electrification, Duramac is also actively developing in the field of electric vehicle power systems.
The company provides customers with full life cycle services, from design to power system supply, installation and commissioning, to after-sales service training and spare parts supply, as well as troubleshooting and overhaul technical support. This full range of services ensures that customer equipment maintains high reliability and long-term operating efficiency during use.
These comprehensive power systems and service capabilities enable Duramac to occupy an important position in the field of construction machinery and provide advanced solutions for future electrification trends.
SHENGRUI-FF8HT Series Main Feature
- Transverse FF layout 8-speed hybrid automatic structure, developed based on FF8AT fuel transmission platform.
- Integrated P2 hybrid motor assembly, full electronic hydraulic shift control system.
- Integrated forced circulation lubrication and built-in thermal management system, stable operation under frequent hybrid power switching conditions.
- Single torque specification of 420 N.m, smooth power switching, excellent fuel-saving performance.
General Specifications of FF8HT Series
| Maximum Input Torque: | 420 N.m |
| Maximum Input Speed: | 6000 RPM |
HW21712XSJ
The Datong HW21712XSJ Heavy Manual No-Sync Gearbox has a torque of 1900 N.m, a gear ratio range of 15.011 – 1, an oil capacity of 13 L (13.5 L when equipped with a power take-off), an overall length of 915 mm, and a weight of 379 kg.
DuraMac
DCEC ISL8.9 series automotive engine is four-strokes engine with 102 mm bore and 120 mm stroke, Equipped with Bosch (or BYC or Weifu) pump. engine comes with turbocharger and Air- Air intercooler. The prime power range is from 269 HP to 394 HP.
Fast Gear
The F6A Series Automated Transmission uses the FAST automatic transmission, has six front gears, the transmission ratio step arrangement is reasonable, has very outstanding fuel economy. Adopt hydraulic automatic transmission. The F6A Series Automated Transmission has six gears, each with a different reduction ratio.
EV Truck
Electric wheel dump trucks use electricity as a power source, completely abandoning traditional fuel engines. This change enables the vehicle to achieve true “zero emissions” during operation, without the emission of pollutants such as carbon monoxide, nitrogen oxides, and particulate matter in the exhaust gas, greatly reducing the pollution to the atmospheric environment.
DANA Axle
Applying the advanced technology of DANA with high efficiency, fuel economy, strong load torque, low noise,high reliability, lower procurement cost, low repair cost and lower maintenance cost.
Datong Gear
The Datong HW25712XSJ Heavy Manual No-Sync Gearbox has a torque of 2500 N.m, a gear ratio range of 14.941-1, an oil capacity of 13 L (13.5 L when equipped with a power take-off), an overall length of 993 mm, and a weight of 428 kg.
Crane Trucks
The DFZ5258JSQSZ6D truck crane is a powerful and versatile vehicle designed for efficient lifting and transportation tasks. Equipped with a YCS06300-61 engine and a Shaanxi Auto Fast gear : 10JS120TA high-low gear with synchronizer、PTO gearbox, it provides strong and stable power for demanding operations.
SHENGRUI-New Energy Platform FF8HT Series Transmission
This is the list of all series of SHENGRUI-New Energy Platform FF8HT Series Transmission.
Products Not Available
The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.
